Safety Instructions of D Type Hydrapulper

D type hydrapulper is mainly used for crushing all kinds of pulp , paper and various paper loss . D type hydrapulper series its trough of the current international popular D-type tank . It is in the traditional Hydrapulper made on the basis of design . Its main features are : rotor off center , making contact with the rotor paper materials more quickly and more frequently . D type hydraulic pulper to change the traditional hydraulic crusher slurry flow mode , pulping time can be shortened , without increasing the volume and improving the case of power production capacity .
Following is a brief look at D type hydrapulper safety rules :
1 , Before starting to deal pulper and transmission parts check to make sure no one or obstructions , then switch .
2, Runtime , prohibit the use of metal rods or long hook member extending into the machine .
3 , It are not allowed to stand along the pulper vat or fence pole work .
4, into the pulper to remove debris or repair , you must switch off the power and good warning sign hanging outside, the men of guardianship .
5, Pay attention twisted rope machine automatic starting , do not touch the rope.
6, Note noose machine operation , to avoid rope deviation, if necessary , stop treatment .
7 , Grab hanging objects , the suspended matter was allowed to stand and the following passage .
8 , The cylindrical screen to work , you should cut off the power switch is a good warning sign to hang.